First month free with promo codeFirst month free with codeRedeem promoRedeem

OpenClaw setup guide

Make phone calls from OpenClaw with ClawCall

Yes, there is an OpenClaw phone call skill: run openclaw skills install @clawcall-dev/clawcall-dev, start a new session, and ask OpenClaw to call a US number. ClawCall places the call, gets through the menu and hold, and OpenClaw reports what was said. You don’t need a Twilio, Telnyx or Plivo account.

What you need

  • A running OpenClaw gateway you can reach from its CLI.
  • curl installed on the gateway host, which the ClawCall skill uses to reach the API.
  • A ClawCall account, or an eligible free first call that issues a key the skill saves.
  • A real US destination in +1 E.164 format and a clear task for any call you choose to place.

Use a current OpenClaw gateway. The skill needs curl on the gateway host; the MCP route needs OpenClaw’s MCP support with OAuth. Calls go to US +1 numbers only, one at a time per ClawCall account.

Set up ClawCall in OpenClaw

  1. Install the ClawCall skill

    Install the skill from ClawHub, OpenClaw’s public skill registry. Add --global to install it for every workspace instead of the current one.

    openclaw skills install @clawcall-dev/clawcall-dev
  2. Give it your key

    If you already have a ClawCall API key, set it as CLAWCALL_API_KEY, or under skills.entries.clawcall.apiKey in ~/.openclaw/openclaw.json. Without a key, an eligible first call issues one and the skill saves it for later calls.

    OpenClaw passes skill keys only to runs on the gateway host; a sandboxed run needs the key and curl inside its container. To tie the key to your account later, ask OpenClaw to link your ClawCall key and open the clawcall.dev sign-in link it gives you.

  3. Check the skill is loaded

    Installing a skill makes OpenClaw rescan its skills, and a session picks up the change on its next turn; if ClawCall doesn’t appear, start a new session. Before each call, the skill reads ClawCall’s current API guide, so you never update it by hand when the API changes.

  4. Or connect the MCP server instead

    If you would rather sign in with OAuth than keep a key, add ClawCall as a remote MCP server. OpenClaw’s mcp login runs offline, so stop the gateway first, sign in in your browser and approve calls:read and calls:write, then start the gateway again. This follows OpenClaw’s documented pattern; we have not run it end to end.

    openclaw mcp set clawcall '{"url":"https://api.clawcall.dev/mcp","transport":"streamable-http","auth":"oauth"}'
    openclaw gateway stop
    openclaw mcp login clawcall
    openclaw gateway start
  5. Check it before a real call

    Ask OpenClaw for your ClawCall plan and remaining trial allowance without placing a call. With the MCP route, openclaw mcp doctor clawcall --probe should list thirteen tools.

    On a real call, ClawCall works through the phone menu, waits on hold and talks to whoever answers. If the call needs you, loop-in rings your verified phone, briefs you privately and connects you only if you accept. When the call ends, OpenClaw gets the lifecycle, the network outcome and talk time, plus transcript evidence when actually captured and a temporary recording link when available; it reads the transcript to tell you whether the task was done.

    If a call fails, the reason comes back with the call: an unsupported destination means a non-US number, and a concurrent call limit means another call on your account is still running. More fixes are in the docs’ troubleshooting section.

Something not working? See troubleshooting.

Try it

The skill tells OpenClaw when to use it, so asking for a phone call is usually enough; naming ClawCall makes the choice explicit.

Start with a test call to your phone

Using ClawCall, call my phone at +1XXXXXXXXXX. Say this is a test, ask me to confirm I can hear you, then hang up and tell me what was said.

Let it call without asking each time

If OpenClaw asks for approval before running ClawCall’s tools or commands, choose the option that always allows ClawCall, so a call can run from dial to report without stopping at each step.

Always allow only skips the repeated approval prompts. It does not widen what the key or the two OAuth scopes can do, and it does not allow bulk or robocall-style calling.

Turn it off

  1. Remove ClawCall in OpenClaw.
  2. In your ClawCall dashboard, open Settings → Connected AI assistants and select Disconnect.

Questions

Is there an OpenClaw phone call skill?
Yes. The ClawCall skill on ClawHub installs with openclaw skills install @clawcall-dev/clawcall-dev. It places real calls to US numbers through ClawCall, so you don’t set up a Twilio, Telnyx or Plivo account, a phone number or a public webhook. Source: ClawHub: ClawCall skill Source: OpenClaw docs: Skills
Can OpenClaw get its own phone number?
With ClawCall, calls go out from a shared pool of US numbers on Unlimited ($8.99 a month), or from a private reserved caller-ID number of your own on Unlimited Reserve ($14.99 a month). OpenClaw’s own voice-call plugin uses a number you rent from Twilio, Telnyx or Plivo. Source: ClawCall pricing Source: OpenClaw docs: Voice call plugin configuration
Can OpenClaw answer phone calls?
ClawCall answers calls to your reserved number on Unlimited Reserve Plus ($18.99 a month), following the greeting and instructions you set. OpenClaw’s voice-call plugin can also take inbound calls on your carrier number; its inbound policy is off by default and can be set to an allowlist, pairing or open policy. Source: ClawCall pricing Source: OpenClaw docs: Voice call TTS and inbound calls
Does the skill send my API key anywhere else?
No. The skill fetches ClawCall’s public guide without credentials and sends your key only to api.clawcall.dev when it places or checks a call. Keep the key in an environment variable or OpenClaw’s skill config, not in a chat message. Source: ClawHub: ClawCall skill Source: ClawCall security
How do I remove ClawCall from OpenClaw?
Remove the ClawCall skill from your OpenClaw skills, then delete the key from CLAWCALL_API_KEY, skills.entries.clawcall.apiKey or ~/.config/clawcall/key.json. If you connected the MCP server, run openclaw mcp logout clawcall and disconnect OpenClaw in ClawCall’s connected AI assistants settings. Source: OpenClaw docs: Skills Source: OpenClaw docs: MCP transports and OAuth Source: ClawCall security
What does it cost?
New ClawCall accounts get 30 calls or 30 minutes free, whichever comes first. After that, plans start at $8.99 a month for unlimited calls. The app you connect may need its own plan.
Do I have to mention ClawCall?
No. Once it’s connected, your agent uses ClawCall on its own when a request needs a phone call. Naming it is optional.
What number does the call come from?
A shared ClawCall number, or your own US number on Unlimited Reserve.
How long does ClawCall keep transcripts and recordings?
ClawCall deletes transcripts 7 days after a call ends and recordings 10 minutes after a call ends. Recording URLs are temporary and cannot be renewed after they expire.

Sources

  1. OpenClaw docs: Skills
  2. OpenClaw docs: ClawHub
  3. ClawHub: ClawCall skill
  4. OpenClaw docs: MCP servers
  5. OpenClaw docs: MCP transports and OAuth
  6. OpenClaw docs: Voice call plugin
  7. OpenClaw docs: Voice call plugin configuration
  8. OpenClaw docs: Voice call TTS and inbound calls
  9. ClawCall: Hosted MCP for AI agents
  10. ClawCall MCP and API documentation
  11. ClawCall pricing
  12. ClawCall security

Give OpenClaw a phone

New accounts get 30 calls or 30 minutes free, whichever comes first.